PD1-2 Post Driver Valve & Top-link Kit

Upgrade your PD1 Post Driver to a PD1-2 Post Driver with this all in one hydraulic kit…

You can then control raising & dropping the hammer as well as controlling the included Power (hydraulic) Top-link ram from outside the tractor cab

We will also provide you with the full retro-fit bracket for the 2 lever control valve & all the hydraulic fittings that you’ll need.

Here’s what’s included:

• 1no. x Two Lever Control Valve “2LCV” (To control the hammer & power top-link ram from outside the tractor cab).
• 1no. x Retro-fit Bracket to hold the 2 Lever Control Valve. (This will need to be welded on)
• 1no. x Hydraulic Power Top-Link Ram of your choice. (19″, 22′, 24″ or 26″)
• 2no. x 3/4” hoses, each 5ft in length (1 for flow & 1 for return to tractor’s spools from the control valve).
• 1no. x 3/4″ hose, 4ft in length (This hose connects the main hammer ram to the control valve).
• 2no. x 3/8″ hoses, each 4ft in length (These hoses connect the Top-link ram to the control valve).
• 2no. x 1/2“ male probes.
• And all the additional hydraulic fittings & washers required.

(If you would like more info. & photos. showing the difference in the PD1 , PD1-1 & the PD1-2 Post Driver, then check out the models in the “Post Drivers” category).

Order & Delivery information (Please Read):

After placing an order, you will receive a direct email within 48 hours with your “Order Dates” which will be as follows:

• Payment Date (Date of cleared funds).
• Dispatch Date (7 workings days from cleared funds).
• Arrival Date (Approx. 2 working days from dispatch).

We will provide the tracking number & link to the courier’s website.