Want to upgrade your PD1 Post Driver to a PD1-1 Post Driver, so you can control raising & dropping the hammer from outside the tractor cab?
Here’s what’s included in the “Keep It Standard” Kit:
- 1no. x Single Lever Control Valve (To control raising & dropping the hammer outside the tractor cab).
- 2no. x 3/4” hoses, 5ft in length (1 for flow & 1 for return to tractor’s spools).
- 1no. x 3/4″ hose, 4ft in length (This hose connects the main hammer ram to the single lever control valve).
- 2no. x 1/2“ male probes.
- And all the additional hydraulic fittings & washers required.
- Please Note: The Retro Fit Bracket (as shown in the photos) to hold the Control Valve is not included in the standard kit.
- Keep it Standard (As described above)
- Add Retro Fit Valve Bracket (Will need to be welded or screwed on)
(If you would like more info. & photos. showing the difference in the PD1 and PD1-1 Post Drivers, then check out the 2 models in the “Post Drivers” category).
Order & Delivery information (Please Read):
After placing an order, you will receive a direct email within 48 hours with your “Order Dates” which will be as follows:
- Payment Date (Date of cleared funds).
- Dispatch Date (5 to 7 workings days from cleared funds).
- Arrival Date (Approx. 2 working days from dispatch).
We will provide the tracking number & link to the courier’s website.